There is a lot more to using the metronome than simply sampling a few bars to get the tempo of a song. In fact, the metronome is quite essential to all musical activities these days. You can thank artist/guitarist extraordinaire/inventor Les Paul for elevating the status of the metronome from a mere device for providing tempos to the indispensable live and studio tool that it is today. You may have heard that he is the creator of multitracking, which is the process of recording one track at a time and then mixing them together afterwards. Before the advent of multitracking, bands would all get in a soundproof room, place a microphone in the center of them, and record a few good takes to choose from. Multitracking allowed each instrument to be recorded separately for the first time. This approach had a number of advantages, but it also meant that there had to be a steady pulse for everyone to follow. The multitracking process is used to produce the vast majority of CDs today.
Multitracking necessitates being able to play with a far greater accuracy than was required in the early days of recording.
The typical modern procedure for recording a song goes like this: The band will spend some time playing the song to a metronome to determine its tempo. Once a consensus has been reached, a metronome track will be recorded for guidance. This is what's referred to as the click track. In digital recording, there is no need to record anything because the click can be set and played during recording and even during playback. When viewed on the screen, each track will be stacked from top to bottom and will extend from left to right. Time intervals can be denoted in time or in bars and beats. These divisions are what's known as "the grid".
Usually, instruments are recorded in order from the most rhythm-centric to most melodic - E.G.: drums, bass, guitars, keyboards, vocals. However, because of the grid, it is possible to record in pretty much any order. That's one of the reasons that recording is done this way today. If you have a famous session drummer flying in to do tracking in two weeks, why hold up production? As long as the bass and guitars are in time, they will sync up. For this purpose, a scratch drum track can be recorded using a drum program or machine. This would be replaced later by the real drums. You can see why it would be beneficial to be able to play very tightly to a click!
As I mentioned in my last article, amateur musicians tend to shy away from using click tracks because they falsely believe that it will take away the feel. This assumption is based on inexperienced players' tendency to try to chase the individual clicks rather than feeling the groove of the pulses. Having recorded guitar tracks myself over drums that were not recorded to a click, I'm not sure why anyone would put themselves through the hell of trying to sync up a riff with uneven drums! The truth is that recordings done this way will almost always sound sloppy and will take three times longer to record. The exception is highly skilled players who record everything at once to capture more interaction between the instruments. Unless you've done at least ten CDs using a click track, I don't recommend that you even think about experimenting with recording without one! The fact is that, even bands who do record everything at once or that use an analog system to get that old school warmth, still need to be extremely tight because it is standard practice to have a professional digital editor go over everything to clean up the tracks. When the difference between tight and sloppy tracks can cost in the tens of thousands of dollars, you can bet that no record company would let you put down anything less than near perfect parts.
For the reasons stated above,
no matter what instrument or style of music you play, it is crucial that you can play very tightly to a click.
In a live setting, you can get away with playing without a metronome, but you may not have considered all the circumstances that would necessitate playing to a click live. The most common is the dreaded live "speed up" phenomenon which can affect even the most seasoned musicians. A cheering crowd and adrenaline rush can make for a more energetic performance than you were prepared for! The solution is to have the drummer wear an earpiece with a click. The rest of the band don't need to wear one, since they can follow the drummer. Oddly enough, I haven't met many drummers, or even whole bands for that matter, who want to do this. They say that it takes too much effort to follow the metronome and it takes away from the enjoyment of the live experience. This is a very interesting response because it highlights the difference between playing for fun and playing professionally. It does take some getting used to, but the difference is a loosey-goosey "bar" band sound versus a tight pro sound.
The other common scenarios for using a click live are when sequencing is involved such as time sensitive lighting or sound effects and live recording. If you release CDs, there comes a time when you will want to release a live CD and/or DVD. Just check out most any professional live recordings and I think you'll find that the playing is surprisingly solid. That's because the drummer is almost certainly playing to a click! If not, he or she undoubtedly practices to one regularly.
More on Practicing for Tightness
I have discovered something interesting about tight players. They all spend a lot of time recording! In my early days as a musician, I practiced to a metronome when I was getting ready to record and the odd time that the mood struck me, which wasn't all that often! This did very little to help my timing at all. It seems that playing along to a metronome will not do wonders for you by itself. At best, it will make your live performances more solid. It was not until I put together a home studio and began to use it every day that I started to see some real progress. Having read interviews and spoken to some of the best players, I have come to realize that the habitual recording to a click is what separates the really tight players from the so-so ones. It acts as a mirror to your playing that does not lie. All too often, players will only hear what they want to hear when playing a part!
Recording a part forces you to listen to the sounds that your hands are actually producing as opposed to what you're hearing in your head.
Here is the process that many pros follow when perfecting and recording a part:
Tightness is not just about following a click track to a very exacting degree, but it is also about clearly enunciating each note and making what's in your head come across on "tape". The tightest players happen to be the ones who spend a lot of time working on this very skill. Whether you're a hobbyist or a full-time pro, you can't go wrong by recording yourself over a click track - often. Until next time, happy practicing!
Guitar CoursesRhythm Guitar Mastery
How to strum guitar like a pro, master rhythms, and build your vocabulary of essential chords
17 Essential Strum Patterns
Learn 17 Strums, 8 Bonus Songs + Chord Book
60s Rock Strumming Songs
Learn how to play 18 classic 60s rock tunes
70s Rock Strumming Songs
Learn how to play 20 classic 70s rock tunes
80s Rock Strumming Songs
Learn how to play 20 classic 80s rock tunes
90s Rock Strumming Songs
Learn how to play 20 classic 90s rock tunes
Modern Country Strumming Songs
Learn how to play 16 modern country songs
Guitar Lick Factory
A system for creating rock & blues guitar licks
© 1999-2022 Cyberfret.com Free Online Guitar Lessons